SCHMIDT® Toggle Presses

Features

* High force at the end of stroke (see diagramm below)

* Honed bores and ground rams provide a long service life and a precise guidance

Rapid changeover due to the easy and secure adjustment of the working height

* Table tops with precision T-slot and precise alignment between the ram and table bores allow for accurate and repeatable set ups which reduces set-up times

* The original position of the hand lever can be varied by 360°

* Horizontal pull (111 / 113)

* Available for left-handed and right-handed use

* The return stroke force of the ram can be adapted to different tool weights

* Alignment < 0.05 mm between upper and lower tool

* No lubrication necessary

5 to 15 kN Technical Data

Press type			13 13F	13R 13RF	11 11F	11R 11RF	15 15F	15R 15RF	14 14F	14R 14RF	16 16F	16R 16RF	17 17F
Press head type			13-40 13F-35	13R-40 13RF-35	11-45 11F-35	11R-45 11RF-35	11-45 11F-35	11R-45 11RF-35	11-60 11F-50	11R-60 11RF-50	11-60 11F-50	11R-60 11RF-50	11-20 11F-20
Nominal force		kN	5	5	12	12	12	12	12	12	12	12	15
Working stroke⁵⁾	A	mm	40 35	40 35	45 35	45 35	45 35	45 35	60 50	60 50	60 50	60 50	20 20
Throat depth	C	mm	65	65	86	86	86	86	86	86	86	86	86
Press head height	S	mm	385 400	385 400	520 540	520 540	520 540	520 540	500 520	500 520	500 520	500 520	620 640
Max. Weight of upper tool³⁾ standard / reinforced spring		kg	1.2 / 3.5 1.5 / 3	1.2 / 3.5 1.5 / 3	2 / 4.5 2.5 / 6	2/4 2/6	2 / 4.5 2.5 / 6	2/4 2/6	1.5 / 2.5 2/5	1.5 / 2.5 1.5 / 4	1.5 / 2.5 2/5	1.5 / 2.5 1.5 / 4	2.5 / - 2.5 / -
Working height ⁴⁾	F
Stand No. 13		mm	65 – 180 40 – 155	66 – 180 40 – 155
Stand No. 3		mm			75 – 210 50 – 185	75 – 210 50 – 185			90 – 220 65 – 195	90 – 220 65 – 195			65 – 200 50 – 185
Frame No. 5		mm											65 – 315 50 – 300
Frame No. 2		mm					100 – 345 80 – 325	100 – 345 80 – 325			110 – 360 85 – 335	110 – 360 85 – 335
Frame No. 2-600 ○		mm			200 – 585 175 – 560	200 – 585 175 – 560	200 – 585 175 – 560	200 – 585 175 – 560	210 – 595 185 – 570	210 – 595 185 – 570	210 – 595 185 – 570	210 – 595 85 – 570	200 – 585 175 – 560
Frame No. 2-1000 ○		mm			330 – 1020 305 – 1000	330 – 1020 305 – 1000	330 – 1020 305 – 1000	330 – 1020 305 – 1000	340 – 1030 315 – 1010	340 – 1030 315 – 1010	340 – 1030 315 – 1010	340 – 1030 315 – 1010	330 – 1020 305 – 1000
Weight		approx. kg	12	13	23	24	29	29	24	24	29	29	23

Accessories	13 13F	13R 13RF	11 11F	11R 13RF	15 15F	15R 15RF	14 14F	14R 13RF	16 16F	16R 16RF	17 17F
Mechanical counter	○	○	○	○	○	○	○	○	○	○	○
Projection adaptation (total projection) 111 mm, 131 mm			○	○	○	○	○	○	○	○
Additional table top suitable for projection adaptation			○	○	○	○	○	○	○	○	○
Stop clamp ²⁾	○ ○	○ ○	● ●	● ●	● ●	● ●	○ ○	○ ○	○ ○	○ ○	● ●
Shortening the working stroke	10	10	10	10	10	10	10	10	10	10	10

Stand overview	Press type	Stand height M (mm)	Table size W x D (mm)	Table bore D (Ø mm)	Table height K (mm)	Footprint W x L (mm)
No. 13	13	475	110 x 80	20 ^H7	46	110 x 185
No. 3	11, 14, 17	540	150 x 110	20 ^H7	60	150 x 260
No. 5	17	536	185 x 110	20 ^H7	60	185 x 275
No. 2	15, 16	700	185 x 110	20 ^H7	60	185 x 280
No. 2-600	11, 14, 15, 16, 17	974	200 x 160	20 ^H7	98	200 x 290
No. 2-1000	12, 14, 15, 16, 17	1410	200 x 160	20 ^H7	98	200 x 290

Options
● Standard at no extra charge ○ variant with surcharge
¹⁾ Adjustment of the locking position possible on request
²⁾ Stroke shortened by 10 mm for variant at extra cost
³⁾ Weight was determined in hand lever position 45 ° forward (guide values) with standard stroke (not special stroke)
⁴⁾ Typical values; can deviate by ±3 mm due to casting and manufacturing tolerances
⁵⁾ Stroke adjustable with stop clamp (in the scope of delivery)
Special designs
Nickel-plated version for a surcharge, press frame, cast parts and table top chemically nickel-plated, steel parts burnished, aluminum parts anodized, polished components bright
Special painting RAL colors
Special table bores and special ram bores on request

2.5 to 12 kN with Horizontal Pull

Press type			113 113F	113R 113RF	111 111F	111R 111RF
Press head type			113-28 13F-28	113-28 13F-28	111-45 111F-50	111R-45 111RF-50
Nominal force		kN	2.5	2.5	12	12
Working stroke⁵⁾	A	mm	28 28	28 28	45 50	45 50
Throat depth	C	mm	65	65	86	86
Press head height	S	mm	170 180	190 200	215 225	240 250
Max. weight of upper tool ³⁾		kg	1/3 0.6 / 3	0.5 / 2.5 0.6 / 3	2.5 / - 3 / -	2.5 / - 3 / -
Working height ⁴⁾	F
Frame No. 13		mm	50 – 165 40 – 155	66 – 180 40 – 155
Frame No. 3		mm			120 – 205 105 – 195	120 – 205 105 – 195
Frame No. 2		mm			120 – 345 105 – 335	120 – 345 105 – 335
Frame No. 2-600 ○		mm			200 – 580 185 – 570	200 – 580 185 – 570
Frame No. 2-1000 ○		mm			330 – 1020 310 – 1000	330 – 1020 310 – 1000
Weight		approx. kg	11	11	28	28

Options	113 113F	113R 113RF	111 111F	111R 111RF
Mechanical counter	○	○	○	○
Projection adaptation (total projection) 111 mm, 131 mm			○	○
Additional table top suitable for projection adaptation			○	○
Stop clamp ²⁾	● ○	● ○	● ○	● ○
Shortening the working stroke	10	10	10	10

Frame overview	Press type	Frame height M (mm)	Table size W x D (mm)	Table bore D (Ø mm)	Table height K (mm)	Footprint W x L (mm)
No. 13	113	475	110 x 80	20 ^H7	46	110 x 185
No. 3	111	540	150 x 110	20 ^H7	60	150 x 260
No. 2	111	700	185 x 110	20 ^H7	60	185 x 280
No. 2-600	111	974	200 x 160	20 ^H7	98	200 x 290
No. 2-1000	111	1410	200 x 160	20 ^H7	98	200 x 290

Options
● Series with no additional charge ○ Additional charge applies
¹⁾ Adjustment of the locking position possible on request
²⁾ Stroke shortened by 10 mm for variant at extra cost
³⁾ Weight was determined in hand lever position 45 ° backwards (guide values) with standard stroke (not special stroke)
⁴⁾ Typical values; can deviate by ±3 mm due to casting and manufacturing tolerances
⁵⁾ Stroke adjustable with stop clamp (in the scope of delivery)
Special designs
Nickel-plated version for a surcharge, press frame, cast parts and table top chemically nickel-plated, steel parts burnished, aluminum parts anodized, polished components blank
Special painting RAL colors
Special table bores and special ram bores on request

5 to 22 kN with Square Ram

Press type			13V 13VF	13VR 13VRF	11V 11VF	15V 15VF	11VR 11VRF	15VR 15VRF	14V 14VF	16V 16VF	14VR 14VRF	16VR 16VRF	19V 19VF	19VR 19VRF
Press head type			13V-40 13VF-40	13V-40 13VF-40	11V-45 11VF-45	11V-45 11VF-45	11VR-45 11VRF-45	11VR-45 11VRF-45	11V-60 11VF-60	11V-60 11VF-60	11VR-60 11VRF-60	11VR-60 11VRF-60	19V-40	19VR-40
Nominal force		kN	5	5	12	12	12	12	12	12	12	12	22	22
Working stroke	A	mm	40 40	40 40	45 45	45 45	45 45	45 45	60 60	60 60	60 60	60 60	40 40	40 40
Throat depth	C	mm	65	65	86	86	86	86	86	86	86	86	131	131
Press head height	S	mm	385 400	385 400	510 530	510 530	510 530	510 530	510 530	510 530	510 530	510 530	620 620	620 620
Max. weight of upper tool⁴⁾standard / reinforced spring		kg	1,2 / 4 2 / 3,5	1,2 / 4 2 / 3,5	1,6 / 4,2 2 / 5	1,6 / 4,2 2 / 5	1,6 / 4,2 2 / 5	1,6 / 4,2 2 / 5	1 / 3,5 1 / 3,5	1 / 3,5 1 / 3,5	1 / 3,5 1 / 3,5	1 / 3,5 1 / 3,5	2 / - 2 / -	2 / - 2 / -
Working height ⁵⁾	F
Frame No. 13		mm	65 – 180 50 – 165	66 – 180 50 – 165
Frame No. 3		mm			80 – 210 60 – 190		80 – 210 60 – 190		80 – 210 60 – 190		80 – 210 60 – 190
Frame No. 2		mm				105 – 350 85 – 330		105 – 350 85 – 330		105 – 350 85 – 330		105 – 350 85 – 330
Frame No. 2-600 ○		mm				200 – 585 185 – 570		200 – 585 185 – 570		210 – 590 195 – 575		210 – 590 195 – 575
Frame No. 2-1000 ○		mm				330 – 1020 315 – 1000		330 – 1020 315 – 1000		340 – 1030 325 – 1015		340 – 1030 325 – 1015
Frame No. 19		mm											90 – 220	90 – 220
Frame No. 19-400 ○		mm											160 – 400	160 – 400
Frame No. 19-500 ○		mm											260 – 550	260 – 550
Weight		approx. kg	12	12	24	32	24	32	24	32	24	32	85	85

Optionen	13V 13VF	13VR 13VRF	11V 11VF	15V 15VF	11VR 11VRF	15VR 15VRF	14V 14VF	16V 16VF	14VR 14VRF	16VR 16VRF	19V 19VF	19VR 19VRF
Strock release	○	○	○	○	○	○	○	○	○	○	○	○
Mechanical counter	○	○	○	○	○	○	○	○	○	○	○	○
Throat depth frame 111 mm, 131 mm		○	○	○	○	○	○	○	○
Throat depth frame 151 mm											○	○
Additional fixture mounting plate suitable for throat depth frame			○	○	○	○	○	○	○	○	○	○

Frame Overview	Press Type	Frame Height M (mm)	Table Size B x T (mm)	Table Bore D (Ø mm)	Table Height K (mm)	Mounting Surface B x L (mm)
No. 13	13	475	110 x 80	20^H7	46	110 x 185
No. 3	11, 14	540	150 x 110	20^H7	60	150 x 260
No. 2	15, 16	700	185 x 110	20^H7	60	185 x 280
No. 2-600	15, 16	974	200 x 160	20^H7	98	200 x 290
No. 2-1000	15, 16	1410	200 x 160	20^H7	98	200 x 290
No. 19	19	640	200 x 160	25^H7	112	200 x 370
No. 19-400 ○	19	840	250 x 200	40^H7	145	250 x 460
No. 19-500 ○	19	1000	250 x 200	40^H7	145	250 x 480

Options
● Series with no additional charge ○ Additional charge applies
¹⁾ Adjustment of the locking position possible on request
²⁾ Stroke shortened by 10 mm for variant at extra cost
³⁾ Weight was determined in hand lever position 45 ° backwards (guide values) with standard stroke (not special stroke)
⁴⁾ Typical values; can deviate by ±3 mm due to casting and manufacturing tolerances
⁵⁾ Stroke adjustable with stop clamp (in the scope of delivery)
Special designs
Nickel-plated version for a surcharge, press frame, cast parts and table top chemically nickel-plated, steel parts burnished, aluminum parts anodized, polished components blank
Special painting RAL colors
Special table bores and special ram bores on request