SCHMIDT® Mass Flow Sensor IL 30.208 and IL 30.212 Mini-IL

Specifications

Technical data
Technology design	Thermal InLine Mass Flow Sensor
Measuring range V_N	IL 30.208: 0.2 … 20 Norm-l/min; 1 … 100 / 200 Norm-l/min IL 30.212: 3 … 300 / 500 Norm-l/min
Lower detection limit V_N	IL 30.208: 0.2 resp. 1 Norm-l/min IL 30.212: 3 Norm-l/min
Measuring range T_M	-20 … +60 °C
Measuring direction	Unidirectional
Measured medium	Clean (compressed) air or nitrogen; other gases on request (fluid group 2 according PED 2014/68/EU)
Measuring quantity	Standard mass flow V_N¹⁾ Temperature of medium T_M (only with digital output)
Measuring accuracy
Measuring accuracy V_N	±(3 % of measured value + 0.3 % of fmr) ²⁾ With higher volume flows (> 50 % of fmr) an operating pressure > 3 bar is recommended for optimal measuring results
Response time (t₉₀) V_N	Approx. 10 s
Temperature of medium T_M	±2K ( (V_N > 2 % of measuring range)
Operating temperature
Sensor	-20 … +60 °C (-10 … +60 °C when push-in fittings for pneumatic hose connections are used)
General data
Humidity	Measuring mode: Non-condensing (< 95 % RH)
Operating pressure	8 bar (overpressure)
Supply voltage	24 V DC ± 10 %
Current consumption	Typ. 25 mA / max. 100 mA
Analog output (order option)	1 x 4 … 20 mA (V_N)
Digital output (order option)	Modbus RTU (V_N and T_M) resp. Module interface incl. analogue output 1 x 4 … 20 mA (V_N)
Electrical connection	Analogue version: Connection cable, pigtail, 4 x 0.14 mm², 2 m long Digital version: Connection cable, 0.2 m long, M12 connector 8-pole Cable: PVC grau, outer Ø 3.8 mm
Length of connection cable	max. 100 m (recommended; take care of wire resistance)
Mounting position	Arbitrary
Installation	Inner threads DN8 or DN12 (G1/4 and G 3/8): Measuring section pipes or push-in fittings for pneumatic hose connections are incl.
Protection type	IP64 (housing)
Protection class	III (SELV or PELV)
Dimensions (L x W x H)	IL 30.208: 37 x 30 x 81 mm (without pipes / push-in fittings) IL 30.212: 42 x 30 x 84 mm (without pipes / push-in fittings)
Material
Enclosue	PBT
Fixture	Brass, nickel-plated
Tube body	Stainless steel

¹⁾ Standard conditions: T_N = 20 °C and p_N = 1,013.25 hPa

²⁾ Related to adjustment reference; "fmr" = final measuring range

Subject to technical changes.

Order information

Order information SCHMIDT^® InLine Mass Flow Sensor Mini-IL
	Description	Article-Number
Basic sensor	SCHMIDT^® InLine Mass Flow Sensor IL 30.208 V_N; 8 bar; 3 % class; DN 8 / G 1/4	572900	A	B	C	D
	Options
Type	Standard		1
Mechanical type	2 measuring section tubes (length 100 mm, thread R1/4 on both sides; not fitted)			1
Mechanical type	2 push-in fittings for pneumatic hose connection (hose outer diameter 12 mm, fitted, field of application -10 … +60 °C)			2
Measuring range	Measuring range 0.2 … 20 Norm-l/min				1
	Measuring range 1 … 100 Norm-l/min				2
	Measuring range 1 … 200 Norm-l/min				3
Output signal	Analogue output 1 x 4 … 20 mA (V_N; with 2 m fixed cable, open cable ends)					1
Output signal	Digital output (Modbus RTU [V_N and T_M] resp. module interface incl. analogue output 4 … 20 mA [V_N]; 0.2 m cable with M12 connector, 8-pole)					2
	Description	Article-Number
Basic sensor	SCHMIDT^® InLine Mass Flow Sensor IL 30.212 V_N; 8 bar; 3 % class; DN 12 / G 3/8	572901	A	B	C	D
	Options
Type	Standard		1
Mechanical type	2 measuring section tubes (length 150 mm, thread R3/8 on both sides; not fitted)			1
Mechanical type	2 push-in fittings for pneumatic hose connection (hose outer diameter 12 mm, fitted, field of application -10 … +60 °C)			2
Measuring range	Measuring range 3 … 300 Norm-l/min			1
Measuring range	Measuring range 3 … 500 Norm-l/min			2
Output signal	Analogue output 1 x 4 … 20 mA (V_N; with 2 m fixed cable, open cable ends)					1
Output signal	Digital output (Modbus RTU [V_N and T_M] resp. module interface incl. analogue output 4 … 20 mA [V_N]; 0.2 m cable with M12 connector, 8-pole)					2

	Standard Factory Calibration Certificate	Article-Number
Calibration Certificate	Factory Calibration Certificate IL 30.208	on request
Calibration Certificate	Factory Calibration Certificate IL 30.212	on request

Accessories

Connection technology

Description	Article-Number
Power supply unit: output 24 V / 1A DC, supply voltage 115/230 V AC (strip terminal)	535 282

Measured value display

Description	Article-Number
LED display MD 10.010 in wall housing to show volume flow and flow velocity, 85 … 250 V AC and sensor power supply	527 320
LED-display MD 10.010; as with 527 320 but with 24 V DC voltage supply 527 320, with a 24 V DC power supply	528 240
LED display MD 10.015, similar to 527 320 but with an additional sum function and a second measuring input	527 330
LED display MD 10.015, similar to 527 330 but with 24 V DC voltage supply	528 250
Measuring value module MD 10.020, 7-Segment-Display, incl. 0.6 m connection cable to connect to the module plug	554 900
Assembly kit for pipe assembly suitable for MD 10.010/10.015, including pipe clamps and collar for adjustment for the pipe diameter	531 394

Miscellaneous

Description	Article-Number
Factory calibration certificate for IL 30.208	on request
Factory calibration certificate for IL 30.212	on request
SCHMIDT® PC Programming Kit; Adapter (USB / M12, 5-pole), USB stick (Sensor App PC, driver; for PC, laptop, notebook; Windows)	564 710
Datalogger DL 10.010	569 300
SCHMIDT^® Bluetooth^® Module BT 10.010	560 500
SCHMIDT^® Sensor App (Android): free of charge download at "Service & Support" – Sensors	Download
SCHMIDT® Interface Splitter IL 30.2xx (Mini-IL) configuration 1 (Y splitter only)	on request
SCHMIDT® Interface Splitter IL 30.2xx (Mini-IL) configuration 1 (Y splitter + plug-in power supply)	on request