SCHMIDT® Rack-and-Pinion Presses

Especially for small batches, a manual workstation with mechanical presses is often the most economical solution. To help you achieve your production goals, we have continuously developed the hand lever presses.

Do you need a long stroke and linear force progression for assembly processes? Then SCHMIDT® Rack-and-Pinion Presses are the right choice.

Features

  • Long stroke
  • Linear force progression
  • Precise adjustment of the press depth via an integrated hardened adjustable stop
  • Honed ram guiding and ground rams provide a long service life and a precise guidance

* Rapid changeover due to the easy and secure adjustment of the working height

  • Table tops with precision T-slot and precise alignment between the ram and table bores allow for accurate and repeatable set ups which reduces set-up times

* The original position of the hand lever can be varied by 360°

  • Available for left-handed and right-handed use
  • The return stroke force of the ram can be adapted to different tool weights
  • Alignment < 0.05 mm between upper and lower tool
  • No lubrication necessary

1.6 to 2.5 kN Technical Data

Press type  55R33R66R11R22R
Press head type55R33R33R11R11R
Nominal forcekN1.61.62.42.42.42.42.52.52.52.5
Working stroke up toAmm404070 / 16070 / 10070 / 16070 / 10080
100
80
100
80
100
80
100
Throat depthCmm65658686868686868686
Press head heightSmm240240350350350350400400400400
Ram boreØmm10H710H710H710H710H710H7
Collet (standard Ø 10)Ømm1 – 171 – 171 – 171 – 17
Hand lever leftOOOOOO
Angle of rotation / mm stroke4.1°4.1°3.2°3.2°3.2°3.2°2.2°2.2°2.2°2.2°
Max. weight of the
upper tool 2)
kg1.512.522.521111
Return stroke lock 1)
Minimum working strokemm1718182626
Locked position 1mm bef. BDC11.5131319.519.5
Locked position 2mm bef. BDC3.54.54.577
Disengaging accuracymm0.060.070.070.080.08
Working height 3)F
Frame No. 13mm55 – 20055 – 200
Frame No. 3mm75 – 22075-220120 – 260120 – 260
Frame No. 2mm100 – 355100 – 355145-360145-360
Frame No. 2-600 Omm200 – 600200 – 600200 – 600200 – 600245 – 650245 – 650245 – 650245 – 650
Frame No. 2-1000 Omm300 – 1030300 – 1030300 – 1030300 – 1030380 – 1080380 – 1080380 – 1080380 – 1080
Weightca. kg11112222303023233131
Accessories55R*33R*66R*11R*22R*
Mechanical counterOOOOOOOOOO
Throat depth frame (total depth)
111 mm, 131 mm, 160 mm, 200 mm
OOOOOOOO
Additional fixture mounting plate
suitable for throat depth frame
OOOOOOOO
Micrometer stopOOOOOO
Frame overview Press type Frame height
M (mm)
Table size
W x D (mm)
Table bore
D (Ø mm)
Table height
K (mm)
Mounting Surface
W x L (mm)
No. 135330110 x 8020H746110 x 185
No. 33, 1400150 x 11020H760150 x 260
No. 26, 2536185 x 11020H760185 x 280
No. 2-6003, 6, 1, 2810200 x 16020H798200 x 290
No. 2-10003, 6, 1, 21250200 x 16020H798200 x 290

Optionen
• Series with no additional charge    O Additional charge applies
2)Adjustment of locking position on request
2) The weight was determined with hand lever position 45° forward (guidelines)
3) Typical values; can vary ± 3 mm due to casting and production tolerances

Other available options

  • Nickel plated – cast parts are electroless nickel plated, steel components black oxide finished, aluminum anodized, precision steel surfaces are untreated
  • Custom paint – press and column can be painted to customer's color specification
  • Bores for adapting tooling – customer specific sizes can be supplied
Back to Top