SCHMIDT® Rack-and-Pinion Presses

Especially for small batches, a manual workstation with mechanical presses is often the most economical solution. To help you achieve your production goals, we have continuously developed the hand lever presses.

Do you need a long stroke and linear force progression for assembly processes? Then SCHMIDT^® Rack-and-Pinion Presses are the right choice.

Features

* Long stroke

* Linear force progression

* Precise adjustment of the press depth via an integrated hardened adjustable stop

* Honed ram guiding and ground rams provide a long service life and a precise guidance

* Rapid changeover due to the easy and secure adjustment of the working height

* Table tops with precision T-slot and precise alignment between the ram and table bores allow for accurate and repeatable set ups which reduces set-up times

* The original position of the hand lever can be varied by 360°

* Available for left-handed and right-handed use

* The return stroke force of the ram can be adapted to different tool weights

* Alignment < 0.05 mm between upper and lower tool

* No lubrication necessary

1.6 to 2.5 kN Technical Data

Press type			5	5R	3	3R	6	6R	1	1R	2	2R
Press head type			5	5R	3	3R	3	3R	1	1R	1	1R
Nominal force		kN	1.6	1.6	2.4	2.4	2.4	2.4	2.5	2.5	2.5	2.5
Working stroke up to	A	mm	40	40	70 / 160	70 / 100	70 / 160	70 / 100	80 100	80 100	80 100	80 100
Throat depth	C	mm	65	65	86	86	86	86	86	86	86	86
Press head height	S	mm	240	240	350	350	350	350	400	400	400	400
Max. weight of the upper tool ³⁾		kg	1.5	1	2.5	2	2.5	2	1	1	1	1
Working height ⁴⁾	F
Frame No. 13		mm	55 – 200	55 – 200
Frame No. 3		mm			75 – 220	75-220			120 – 260	120 – 260
Frame No. 2		mm					100 – 355	100 – 355			145 – 360	145 – 360
Frame No. 2-600 ○		mm			200 – 600	200 – 600	200 – 600	200 – 600	245 – 650	245 – 650	245 – 650	245 – 650
Frame No. 2-1000 ○		mm			300 – 1030	300 – 1030	300 – 1030	300 – 1030	380 – 1080	380 – 1080	380 – 1080	380 – 1080
Weight		ca. kg	11	11	22	22	30	30	23	23	31	31

Options	5	5R*	3	3R*	6	6R*	1	1R*	2	2R*
Mechanical counter	○	○	○	○	○	○	○	○	○	○
Throat depth frame (total depth) 111 mm, 131 mm, 160 mm, 200 mm			○	○	○	○	○	○	○	○
Additional fixture mounting plate suitable for throat depth frame			○	○	○	○	○	○	○	○
Micrometer stop	○	○	○	○	○	○

Frame overview	Press type	Frame height M (mm)	Table size W x D (mm)	Table bore D (Ø mm)	Table height K (mm)	Mounting Surface W x L (mm)
No. 13	5	330	110 x 80	20^H7	46	110 x 185
No. 3	3, 1	400	150 x 110	20^H7	60	150 x 260
No. 2	6, 2	536	185 x 110	20^H7	60	185 x 280
No. 2-600	3, 6, 1, 2	810	200 x 160	20^H7	98	200 x 290
No. 2-1000	3, 6, 1, 2	1250	200 x 160	20^H7	98	200 x 290

Options
●Series with no additional charge ○Additional charge applies
²⁾ Adjustment of locking position on request
³⁾ The weight was determined with hand lever position 45° forward (guidelines)
⁴⁾ Typical values; can vary ± 3 mm due to casting and production tolerances
Other available options
• Nickel plated – cast parts are electroless nickel plated, steel components black oxide finished, aluminum anodized, precision steel surfaces are untreated
• Custom paint – press and column can be painted to customer’s color specification
• Bores for adapting tooling – customer specific sizes can be supplied

SCHMIDT® Rack-and-Pinion Presses

Features

1.6 to 2.5 kN Technical Data

CONTACT

COMPANY

Products

Service